Printer Applicator | Print & Apply Systems
Emerald Datacom Products, Inc in
partnership with Tharo Systems is positioned to design,
build and implement material handling and labeling systems into a
single operation. Our labeling and material handling systems are
designed to fit seamlessly into an existing manufacturing or
packaging line to improve both efficiency and overall
productivity.
Whether you need to automatically
print and apply small polyimide labels to Printed Circuit Boards
or place a product label on the front and side of a cardboard box,
we have a solution for you!
Contact us for further details.
PA2000 Print and Apply System
The PA2000 is a powerful accessory for Tharo H-400/H-600
Series thermal transfer/direct thermal bar code label
printers. The PA2000 features a smaller footprint, 15" wide x
32" tall x 30" long, than other Printer/Applicators, with a
remote front panel for easy access, regardless of the
orientation of the applicator. This allows the PA2000 to be
installed in locations where other Printer/Applicators cannot. |
PA1200t Print and Apply System
A real-time print
and apply system designed for labeling flat surfaces such as
cartons and packages with label sizes ranging from .20" W x
.20" H up to 4.5" W x 8" H. Prices start around $5,895! |
PA1200CW Print and Apply System
For specialty applications requiring a label to wrap around a
corner. This applicator can be setup to wrap onto the front
and top of a product or the front and side of a product.
Applies up to 13" labels in a timely fashion. Why put two
labels on a box if you can get away with just one?
|
PA1200DT Print and Apply System
For specialty applications requiring a label to be applied to
the front and top of a product, or the front and side of a
product with one machine. With extreme accuracy this machine
will do what two machines have done in the past.
|
PA1200FA Print and Apply System
For specialty applications requiring the front of a product to
be labeled. The PA1200fa is accurate and cost effective. Used
to apply a label to the front of a product where the
orientation of the product cannot be changed due to product
line constraints.
|
PA2000 Print and Apply System
With quick integration and increase productivity, the PA500w
is an inexpensive solution for your demanding labeling
requirements. Since the system is electric, there is no need
for compressed air. The wipe on brush assures proper
application to smooth, flat surfaces as well as uneven
surfaces.
|
Tamp Applicator – label is
printed with real-time data and applied directly to the
product with a tamping device. Excellent for applications where
the product varies in height or width.
Tamp / Blow
Applicator –
label is printed with real-time data and then blown directly onto
the product. This application is used when the tamping device
cannot come into contact with the actual product, or if the
product has a slightly curved surface.
Specialty Tamp
Applicator –
specialized label tamp applicator for very small, delicate, high
precision print and apply applications, like electronic
components, PC boards, cosmetics, pharmaceuticals and assemblies.
Wipe On
Applicator –
label is printed with real-time data and wiped onto the product as
it moves down a conveyor belt. The wipe on method is excellent
for high speed production where product height or product
width is consistently the same for each product. |